How To Use

1. To set the temperature you require, gradually turn the thermostat clockwise until your desired temperature is reached. Allow some time between increments for the room temperature to stabilise.

2. Alternatively to heat a cold room quickly, turn the thermostat to the max position. When the room has reached your desired temperature, turn the thermostat anti-clockwise until the thermostat clicks off. The heater will then automatically maintain this room temperature.

3. The thermostat also has a frost protection setting marked *. This setting is useful in areas such as garages to prevent frost damage. If the thermostat is set to its minimum setting *, the heater will cycle ON and OFF to maintain a temperature of approximately 5°C to help protect against frosty conditions.

Select the position for the heater ensuring there is clearance from any furniture and fittings of at least 300mm above the heater and 150mm each side. The heater should only be operated on a flat stable surface.

Over time, dust can accumulate on the heater which can affect performance. It is recommended to clean the unit at least once a month.

1. Turn the unit OFF and disconnect the appliance from the power supply.

2. Remove any dust build up with a soft brush or vacuum cleaner with a soft brush attachment.

3. Wipe the outer surface of the unit with a soft damp cloth. Mild detergent can be used for any stubborn marks.