First Time Use

Your installation location should meet the following requirements:

• Make sure that you install your unit on an even surface to minimize noise and vibration.
• The unit must be installed near a sufficient power outlet, and if using a continuous drainage method, then the plug areas should be accessible.
• The unit should be located at least 50cm from the nearest wall to ensure proper air circulation. The horizontal louvre blade should be at least 50cm away from obstacles.
• The exhaust hose can be extended, however it's best to keep it to the minimum length required. Ensure the hose doesn’t have any sharp bends, sagging areas, or kinks.
• DO NOT cover the Intakes, outlets or remote control signal receptor of the unit, as this could cause damage to the unit.

A - Operation Mode

B - Temperature Down

C - Power On/

D - Temperature Up

E - Fan Speed

1 - Cooling Mode

2 - Dehumidifying Mode

3 - Fan Mode

4 - Temperature Display Area

5 - Auto Wind

6 - Low Fan Speed

7 - Medium Fan Speed

8 - High Fan Speed